WAGO TOPJOB S push-in terminal blocks cross to Wieland selos WTPN, size for size. A WAGO 2002-1201 crosses to a WTPN 2.5 (5D.203.0055.0): both are 2.5 mm2, 24 A 800 V IEC, 20 A 600 V UL. Below are 25 WAGO item numbers, gray, blue and ground blocks from 1.5 to 16 mm2 plus end plates and jumpers, with the Wieland order number on the same row. Check the width and UL amps columns before you swap.
Request a QuoteBook 30 Minutes to Review the Application
Jump to: Gray through blocks · Blue · Ground · End plates · Jumpers · What is different
Gray through blocks
| WAGO TOPJOB S | Width | IEC rating | UL rating (WAGO) | Wieland selos | Width | IEC rating | UL rating (Wieland) |
|---|---|---|---|---|---|---|---|
| 2001-1201 1.5 mm2 gray |
4.2 mm | 17.5 A, 800 V | 15 A, 600 V | WTPN 1.5 5D.202.0055.0 |
3.5 mm | 17.5 A, 500 V | 15 A, 300 V, 26-14 AWG |
| 2002-1201 2.5 mm2 gray |
5.2 mm | 24 A, 800 V | 20 A, 600 V | WTPN 2.5 5D.203.0055.0 |
5.1 mm | 24 A, 800 V | 20 A, 600 V, 26-12 AWG |
| 2004-1201 4 mm2 gray |
6.2 mm | 32 A, 800 V | 30 A, 600 V | WTPN 4 5D.204.0055.0 |
6.1 mm | 32 A, 800 V | 30 A, 600 V, 24-10 AWG |
| 2006-1201 6 mm2 gray |
7.5 mm | 41 A, 800 V | 50 A, 600 V | WTPN 6 5D.206.0055.0 |
8 mm | 41 A, 1000 V | 40 A, 600 V, 20-8 AWG |
| 2010-1201 10 mm2 gray |
10 mm | 57 A, 800 V | 65 A, 600 V | WTPN 10 5D.210.0055.0 |
10 mm | 57 A, 1000 V | 60 A, 600 V, 20-6 AWG |
| 2016-1201 16 mm2 gray |
12 mm | 76 A, 800 V | 85 A, 600 V | WTPN 16 5D.216.0055.0 |
12 mm | 76 A, 1000 V | 82 A, 600 V, 20-4 AWG |
Blue through blocks
| WAGO TOPJOB S | Width | IEC rating | UL rating (WAGO) | Wieland selos | Width | IEC rating | UL rating (Wieland) |
|---|---|---|---|---|---|---|---|
| 2001-1204 1.5 mm2 blue |
4.2 mm | 17.5 A, 800 V | 15 A, 600 V | WTPN 1.5 BL 5D.202.0055.6 |
3.5 mm | 17.5 A, 500 V | 15 A, 300 V, 26-14 AWG |
| 2002-1204 2.5 mm2 blue |
5.2 mm | 24 A, 800 V | 20 A, 600 V | WTPN 2.5 BL 5D.203.0055.6 |
5.1 mm | 24 A, 800 V | 20 A, 600 V, 26-12 AWG |
| 2004-1204 4 mm2 blue |
6.2 mm | 32 A, 800 V | 30 A, 600 V | WTPN 4 BL 5D.204.0055.6 |
6.1 mm | 32 A, 800 V | 30 A, 600 V, 24-10 AWG |
| 2006-1204 6 mm2 blue |
7.5 mm | 41 A, 800 V | 50 A, 600 V | WTPN 6 BL 5D.206.0055.6 |
8 mm | 41 A, 1000 V | 40 A, 600 V, 20-8 AWG |
| 2010-1204 10 mm2 blue |
10 mm | 57 A, 800 V | 65 A, 600 V | WTPN 10 BL 5D.210.0055.6 |
10 mm | 57 A, 1000 V | 60 A, 600 V, 20-6 AWG |
| 2016-1204 16 mm2 blue |
12 mm | 76 A, 800 V | 85 A, 600 V | WTPN 16 BL 5D.216.0055.6 |
12 mm | 76 A, 1000 V | 82 A, 600 V, 20-4 AWG |
Ground (PE) blocks
| WAGO TOPJOB S | Width | IEC rating | UL rating (WAGO) | Wieland selos | Width | IEC rating | UL rating (Wieland) |
|---|---|---|---|---|---|---|---|
| 2001-1207 1.5 mm2 ground |
4.2 mm | Ground (no rating shown) | Not shown | WTPN 1.5 PE 5D.202.9055.0 |
3.5 mm | Ground | 300 V, 26-14 AWG |
| 2002-1207 2.5 mm2 ground |
5.2 mm | Ground (no rating shown) | Not shown | WTPN 2.5 PE 5D.203.9055.0 |
5.1 mm | Ground | 600 V, 26-12 AWG |
| 2004-1207 4 mm2 ground |
6.2 mm | Ground (no rating shown) | Not shown | WTPN 4 PE 5D.204.9055.0 |
6.1 mm | Ground | 600 V, 24-10 AWG |
| 2006-1207 6 mm2 ground |
7.5 mm | Ground (no rating shown) | Not shown | WTPN 6 PE 5D.206.9055.0 |
8 mm | Ground | 600 V, 20-8 AWG |
| 2010-1207 10 mm2 ground |
10 mm | Ground (no rating shown) | Not shown | WTPN 10 PE 5D.210.9055.0 |
10 mm | Ground | 600 V, 20-6 AWG |
| 2016-1207 16 mm2 ground |
12 mm | Ground (no rating shown) | Not shown | WTPN 16 PE 5D.216.9055.0 |
12 mm | Ground | 600 V, 20-4 AWG |
The WAGO ground block datasheets and the Wieland WTPN PE pages show no current rating. Both list the wire range.
End plates
| WAGO end plate | Thickness | Wieland end plate | Thickness |
|---|---|---|---|
| 2002-1291 for 2002 series |
0.8 mm | APWTPN 2,5 0D.203.2055.0 |
2 mm |
| 2004-1291 for 2004 series |
1 mm |
APWTPN 4 0D.204.2055.0 (ask us) |
Ask us |
Jumpers for 2.5 mm2
| WAGO jumper | Poles | Overall width | Wieland jumper bar | Overall width |
|---|---|---|---|---|
| 2002-402 2-way, light gray |
2 | 8.6 mm | IVB WTPN 2,5-2 0D.203.3227.5 |
8.8 mm |
| 2002-403 3-way, light gray |
3 | 13.8 mm | IVB WTPN 2,5-3 0D.203.3327.5 |
13.9 mm |
| 2002-404 4-way, light gray |
4 | 19.1 mm | IVB WTPN 2,5-4 0D.203.3427.5 |
19 mm |
| 2002-405 5-way, light gray |
5 | 24.3 mm | IVB WTPN 2,5-5 0D.203.3527.5 |
24.1 mm |
| 2002-410 10-way, light gray |
10 | 50.4 mm | IVB WTPN 2,5-10 0D.203.4027.5 |
54.7 mm |
Wieland also makes a 20 pole jumper, IVB WTPN 2,5-20, and reducing jumpers to bridge a WTPN 2.5 to a larger block: 2.5R4, 2.5R6, 2.5R10, 2.5R16.
What is different
| Item | WAGO TOPJOB S | Wieland WTPN | What it means |
|---|---|---|---|
| Block width | 4.2, 5.2, 6.2, 7.5, 10, 12 mm | 3.5, 5.1, 6.1, 8, 10, 12 mm | Jumpers and end plates do not swap between brands. A rail of WTPN 2.5 is shorter than the same count of 2002 blocks. |
| UL amps, 6 mm2 | 2006: 50 A | WTPN 6: 40 A | Check the circuit current. For loads above 40 A on 6 mm2, step up to a WTPN 10 (60 A UL). |
| UL amps, 10 mm2 | 2010: 65 A | WTPN 10: 60 A | For loads above 60 A, step up to a WTPN 16 (82 A UL). |
| UL amps, 16 mm2 | 2016: 85 A (WAGO notes 15 mm rail above 76 A) | WTPN 16: 82 A | Size by your load. |
| 1.5 mm2 UL voltage | 2001: 15 A, 600 V | WTPN 1.5: 15 A, 300 V | For 600 V circuits use a WTPN 2.5 (20 A, 600 V UL). |
| End plate thickness | 2002-1291: 0.8 mm | APWTPN 2,5: 2 mm | Allow 1.2 mm more rail per end plate. |
Source: WAGO data sheets (wago.priintcloud.com, published by WAGO GmbH and Co. KG) and Wieland Electric product pages at eshop.wieland-electric.com, read October 2026. WAGO UL ratings are UL 1059 use groups B and C. Wieland UL ratings are factory wiring. Confirm against current datasheets before you build.
Common questions
What is the Wieland equal to a WAGO 2002-1201?
The Wieland selos WTPN 2.5, order number 5D.203.0055.0. Both are 2.5 mm2 gray push-in through blocks rated 24 A 800 V IEC and 20 A 600 V UL. The WTPN 2.5 is 5.1 mm wide; the 2002-1201 is 5.2 mm.
What replaces a WAGO 2004-1201 or 2006-1201?
2004-1201 crosses to WTPN 4, 5D.204.0055.0 (32 A 800 V IEC, 30 A 600 V UL). 2006-1201 crosses to WTPN 6, 5D.206.0055.0 (41 A IEC, 40 A 600 V UL). WAGO lists the 2006 at 50 A UL, so check the load or step up to WTPN 10.
Can I use WAGO 2002-400 jumpers on WTPN blocks?
No. Use the Wieland IVB WTPN 2,5 jumper bars, 2 to 20 poles, listed above. Keep jumpers and blocks the same brand.
What replaces the WAGO 2002-1291 end plate?
The Wieland APWTPN 2,5 end plate, 0D.203.2055.0, 2 mm thick.
Do you cross Phoenix Contact PT too?
Yes. See the Phoenix Contact PT to Wieland WTPN cross reference.
Get your terminal strip crossed
Send the WAGO item numbers from your bill of material, with quantities. We send back the Wieland blocks, end plates, jumpers and markers on one quote.
Request a QuoteBook 30 Minutes to Review the Application
Related: Phoenix Contact PT to Wieland WTPN · All selos WTPN push-in blocks · Terminal block accessories · Wieland terminal blocks · All cross references
WAGO, TOPJOB and CAGE CLAMP are trademarks of WAGO. Applied Control Inc. is not affiliated with WAGO. Names appear only to identify the part being replaced. Check the current manufacturer datasheet before you specify.