Cross-Reference Service
Industrial Motor Cross-Reference Service
Replacing a Baldor, WEG, Siemens, ABB, Marathon, Leeson, or US Motors motor? Send us the nameplate data, or snap a photo, and we'll provide a TECO-Westinghouse drop-in replacement with pricing, efficiency comparison, and lead time. Usually within the same business day.
Submit Your Nameplate Instant Cross-Ref Tool →How It Works
1
Send Your Nameplate
Email us the manufacturer, HP, RPM, voltage, frame, and enclosure type. Or just snap a photo of the nameplate and send it.
2
We Cross-Reference
Our team matches your motor specs to the appropriate TECO-Westinghouse equivalent, verifying frame, mounting, shaft, and efficiency.
3
Receive Your Quote
You get the TECO-Westinghouse part number, pricing, efficiency comparison, and current lead time, typically within one business day.
Brands We Cross-Reference
We commonly replace motors from these manufacturers with TECO-Westinghouse equivalents. If your brand isn't listed, send it anyway. We can cross-reference virtually any NEMA or IEC frame motor.
Reading a TECO Westinghouse Catalog Number
Most TECO Westinghouse motor catalog numbers read left to right: family, horsepower, poles, then a suffix. Once you can read one, you can check a cross at a glance. Here is EP0104C, a 10 HP, 1800 RPM, TEFC, C-face motor.
| Pole digit | Poles | Speed (60 Hz) |
|---|---|---|
| 2 | 2 | 3600 RPM |
| 4 | 4 | 1800 RPM |
| 6 | 6 | 1200 RPM |
| 8 | 8 | 900 RPM |
| HP code | Horsepower |
|---|---|
| 0/2 | 1/4 HP |
| 0/3 | 1/3 HP |
| 0/5 | 1/2 HP |
| 0/7 | 3/4 HP |
| 1/5 | 1.5 HP |
| 7/5 | 7.5 HP |
| 001, 010, 100 | 1, 10, 100 HP |
| Family | What it is |
|---|---|
| EP | MAX-E1 NEMA Premium, TEFC |
| HB, HBV | MAX-E2/841 severe duty, TEFC |
| DHP | Open drip proof (ODP) |
| XP, XPV | Explosion proof (TEXP) |
Other suffix letters mark variants of the same motor. Send the full catalog number, or the nameplate of the motor you are replacing, and we confirm frame and mounting before we quote.
What We Need From You
The more nameplate data you provide, the faster and more accurate the cross-reference. At minimum, we need HP, RPM, and voltage. Ideally, provide all of the following:
✓ Manufacturer & Model
✓ Horsepower (HP)
✓ Speed (RPM)
✓ Voltage
✓ Frame Size
✓ Enclosure Type (TEFC, ODP, etc.)
✓ Mounting (Foot, C-Face, etc.)
✓ Efficiency Class
Or just snap a photo of the nameplate and send it to chris@appliedcontrolinc.com. We'll pull the data.
Need a Drive to Go with Your Motor?
We also supply AC drives, DC drives, and soft starters. Let us quote a complete motor + drive package optimized for your application, including line reactors and transformers if needed.
View Drives Transformers & Reactors →Submit Your Motor for Cross-Reference
One motor or a full BOM. We'll cross-reference every unit and provide TECO-Westinghouse equivalents with pricing. No obligation.
Submit Cross-Reference Request → Book 30 Minutes to Review the ApplicationRelated Pages
TECO-Westinghouse Motors · Bison Gearmotors · Drives & Controls · Transformers & Reactors · Cross-Reference & Quote Tool
Step motors: Applied Motion Products HT series high torque step motors in NEMA 17, 23 and 34 are on the site with datasheet specs. See the Applied Motion collection or send the competitor step motor part number, frame size, holding torque and rated current for a cross.
More cross references
Other families: Hoffman to Hammond · VFD cable, all brands · Enclosure air conditioners, all brands · Control transformers by kVA · All cross references