Manufacturers' Representative, Michigan
Applied Motion Products Stepper and Servo Motion
Applied Control represents Applied Motion Products in Michigan: stepper motors and drives, StepSERVO closed loop steppers, integrated motors, and SV200 servo drives and motors.
Request a QuoteBook 15 MinutesThe Applied Motion line
Applied Motion sits between open loop steppers and full servo systems. Pick the level of feedback the axis needs, then the network your controller speaks.
Stepper motors and drives
Hybrid stepper motors in NEMA 11, 17, 23, 24, 34 and 42 frames, with STAC6 and ST series microstepping drives. See the HT step motors on the site.
StepSERVO closed loop
Stepper motors with a high resolution encoder and a closed loop drive, so the axis holds position under load. StepSERVO integrated motors put the drive, motor and encoder in one body, including a NEMA 11 PoE model.
SV200 servo drives
SV200 servo drives in 120 and 220 VAC for 200, 400 and 750 W J series servo motors, plus DC versions for 24 and 48 VDC systems up to 60 VDC. SVAC3 drives for higher performance axes.
Networks
Class 5 drives speak EtherCAT and EtherNet/IP. Across the line: Modbus RTU and TCP, CANopen and Profinet. Tell us the PLC and we pick the drive.
HT high torque step motors on the site
Twenty-seven HT series motors, NEMA 11, 17, 23, 24 and 34, each with the datasheet figures, the double shaft part number and the encoder versions. Torque is bipolar holding torque. Current is bipolar parallel per phase (four lead motors: bipolar per phase). The full list is in the Applied Motion collection.
| Part | Frame | Holding torque | Current | Length | Leads |
|---|---|---|---|---|---|
| HT11-012 | NEMA 11 | 7.4 oz-in | 1 A | 1.32 in | flying leads |
| HT11-013 | NEMA 11 | 15.3 oz-in | 1 A | 1.87 in | flying leads |
| HT17-268 | NEMA 17 | 31.2 oz-in | 1.34 A | 1.31 in | flying leads |
| HT17-271 | NEMA 17 | 52.4 oz-in | 1.7 A | 1.57 in | flying leads |
| HT17-275 | NEMA 17 | 77.9 oz-in | 1.7 A | 1.9 in | flying leads |
| HT23-400 | NEMA 23 | 264 oz-in | 2.83 A | 2.99 in | discontinued, see HT23-600 |
| HT23-401 | NEMA 23 | 264 oz-in | 4.24 A | 2.99 in | discontinued, see HT23-601 |
| HT23-552 | NEMA 23 | 84.4 oz-in | 1.41 A | 1.71 in | 10 ft cable |
| HT23-553 | NEMA 23 | 167 oz-in | 1.41 A | 2.17 in | 10 ft cable |
| HT23-554 | NEMA 23 | 255 oz-in | 1.41 A | 3.05 in | 10 ft cable |
| HT23-596 | NEMA 23 | 177 oz-in | 1.41 A | 2.13 in | flying leads |
| HT23-598 | NEMA 23 | 158 oz-in | 4.24 A | 2.13 in | flying leads |
| HT23-600 | NEMA 23 | 265 oz-in | 2.83 A | 2.99 in | flying leads |
| HT23-601 | NEMA 23 | 269 oz-in | 4.24 A | 2.99 in | flying leads |
| HT23-603 | NEMA 23 | 354 oz-in | 5 A | 4.37 in | flying leads |
| HT24-105 | NEMA 24 | 177 oz-in | 4 A | 2.13 in | flying leads |
| HT24-106 | NEMA 24 | 382 oz-in | 2.8 A | 3.35 in | close-out, see HT24-108 |
| HT24-108 | NEMA 24 | 354 oz-in | 4 A | 3.35 in | flying leads |
| HT34-486 | NEMA 34 | 1110 oz-in | 8.06 A | 4.63 in | flying leads |
| HT34-487 | NEMA 34 | 1694 oz-in | 8.91 A | 6.14 in | flying leads |
| HT34-495 | NEMA 34 | 555 oz-in | 4.3 A | 3.11 in | 10 ft cable |
| HT34-496 | NEMA 34 | 1110 oz-in | 4.1 A | 4.63 in | 10 ft cable |
| HT34-497 | NEMA 34 | 1694 oz-in | 5.1 A | 6.14 in | 10 ft cable |
| HT34-504 | NEMA 34 | 397 oz-in | 6.3 A | 2.62 in | flying leads |
| HT34-505 | NEMA 34 | 850 oz-in | 6.3 A | 3.78 in | flying leads |
| HT34-506 | NEMA 34 | 1260 oz-in | 5.6 A | 4.94 in | flying leads |
| HT34-687 | NEMA 34 | 1699 oz-in | 8.9 A | 6.14 in | flying leads |
STM integrated step motors on the site
Thirteen STM23 and STM24 integrated steppers: motor and microstep drive in one body, 12 to 70 VDC. S models take step and direction, velocity or streaming SCL commands. Q models add stored Q programs, analog positioning, encoder following and Modbus. The port is RS-232, RS-485 or Ethernet. Current is the built-in drive current per phase, peak of sine.
| Part | Frame | Holding torque | Model | Port | Drive current |
|---|---|---|---|---|---|
| STM23S-2AN | NEMA 23 | 125 oz-in | S, step and direction | RS-232 | 5 A |
| STM23S-2EN | NEMA 23 | 125 oz-in | S, step and direction | Ethernet | 5 A |
| STM23S-2RN | NEMA 23 | 125 oz-in | S, step and direction | RS-485 | 5 A |
| STM23S-3AN | NEMA 23 | 210 oz-in | S, step and direction | RS-232 | 5 A |
| STM23S-3EN | NEMA 23 | 210 oz-in | S, step and direction | Ethernet | 5 A |
| STM23S-3RN | NEMA 23 | 210 oz-in | S, step and direction | RS-485 | 5 A |
| STM23Q-2AN | NEMA 23 | 125 oz-in | Q, stored programs | RS-232 | 5 A |
| STM23Q-2EN | NEMA 23 | 125 oz-in | Q, stored programs | Ethernet | 5 A |
| STM23Q-3AN | NEMA 23 | 210 oz-in | Q, stored programs | RS-232 | 5 A |
| STM23Q-3EN | NEMA 23 | 210 oz-in | Q, stored programs | Ethernet | 5 A |
| STM24SF-3AN | NEMA 24 | 340 oz-in | S, step and direction | RS-232 | 6 A |
| STM24SF-3RN | NEMA 24 | 340 oz-in | S, step and direction | RS-485 | 6 A |
| STM24QF-3AN | NEMA 24 | 340 oz-in | Q, stored programs | RS-232 | 6 A |
What we need to size an axis
Load, torque and speed, acceleration, position accuracy, holding or brake needs, duty cycle, supply voltage, network, and the environment. Replacing a pneumatic axis? Send the stroke, the load and the cycle time.
Get a Quote or Review the Application
Send a part number for a quick quote, or book 15 minutes to go through the application.
Request a Quote Book 15 MinutesRelated lines from Applied Control
Block power supplies · Wieland terminal blocks · Tekima cable