1000.40 AGRO Progress MS M40 Cable Gland, 24 to 33 mm, Nickel-Plated Brass, Short Thread
Priced within one business day. Factory-direct pricing from an authorized rep. Replacing a competitor part? Send the number and we cross it.
Questions or Require Additional Information?
Call us Today at +1-248-830-4850
The AGRO 1000.40 is a M40x1.5 cable gland in nickel-plated brass from the Progress MS series, short entry thread (8 mm). The two-piece sealing insert covers 28.5 to 33 mm on its own and 24 to 28.5 mm with the inlet in place, so one part number clamps cable from 24 to 33 mm. It is rated IP 68 (10 bar) and IP 69 from -40 C to +100 C, with strain relief version A to EN 62444. Applied Control represents the Aeros USA line, the AGRO cable gland source for Michigan and Indiana. Send the article number and the cable diameter and the quote comes back the same business day.
Request a QuoteBook 15 Minutes
1000.40 specifications
| Article number | 1000.40 |
| Series | AGRO Progress MS |
| Entry thread | M40x1.5 |
| Thread length | 8 mm (short entry thread) |
| Clamping range, two-piece insert | 28.5 to 33 mm |
| Clamping range with inlet | 24 to 28.5 mm |
| UL clamping range | 27 mm |
| Wrench size | 46 mm |
| Height H | 31 mm |
| Material | Nickel-plated brass |
| Seal | TPE / NBR |
| O-ring | NBR |
| Strain relief | Version A to EN 62444 |
| Protection class | IP 68 (10 bar), IP 69 |
| Operating temperature | -40 C to +100 C |
| VDE | Yes |
| Packaging quantity | 10 |
| EAN | 7611614104591 |
Specifications from the AGRO product datasheet for 1000.40 and the Aeros USA product page. Confirm against the current datasheet before installation.
AGRO datasheet for 1000.40 (PDF)
Picking the size
Start from the cable outside diameter, not the thread. Each Progress gland has two ranges: the wide range with the two-piece insert alone, and the smaller range with the inlet left in. Pick the thread that puts your cable inside one of those ranges, then check the panel hole and wall thickness against the thread length. Short entry threads suit thin sheet metal walls and lock nuts. Long entry threads suit thick walls, tapped holes and castings. Sealing inserts to EN 45545 and NFPA 130 are available on request; the article number gets an F in front. The metric sizes on this site run M16 to M63. Pg and NPT threads are available; send the size you need.
Cross reference
Have a Lapp SKINTOP, Hummel, Pflitsch, Jacob, Thomas and Betts or Hubbell cable gland part number? Send it with the cable outside diameter and the thread you have in the panel, and we cross it to the matching AGRO article number.
Request a QuoteBook 15 Minutes
Lapp, SKINTOP, Hummel, Pflitsch, Jacob, Thomas and Betts and Hubbell are trademarks of their respective owners. Applied Control Inc. is not affiliated with these companies. Competitor names appear only to identify products for comparison.