Applied Motion HT11-012 NEMA 11 High Torque Step Motor, 7.4 oz-in, 1.8 Degree, Single Shaft
Priced within one business day. Factory-direct pricing from an authorized rep. Replacing a competitor part? Send the number and we cross it.
Questions or Require Additional Information?
Call us Today at +1-248-830-4850
Applied Motion HT11-012 is a NEMA 11 high torque step motor rated 7.4 oz-in holding torque, 1 A per phase, 1.8 degree step, 1.32 in long. Four leads, wired bipolar. Applied Control represents Applied Motion Products in Michigan. Send the part number and quantity for a quote.
Request a QuoteBook 15 Minutes
HT11-012 specifications
| Part number | HT11-012 |
| Manufacturer | Applied Motion Products |
| Series | HT11 high torque step motor |
| Frame size | NEMA 11 |
| Step angle | 1.8 degrees (200 steps per revolution) |
| Holding torque | 7.4 oz-in |
| Rated current per phase | 1 A, bipolar |
| Phase resistance | 1.4 ohm |
| Phase inductance | 1.4 mH |
| Winding | 2 phase hybrid, 4 leads, bipolar |
| Rotor inertia | 1.13E-04 oz-in-sec^2 |
| Leads | 4 flying leads, no connector, 7.9 in, 26 AWG |
| Shaft | Single shaft (HT11-012D is the double shaft version) |
| Motor length | 1.32 in |
| Insulation class | Class B (130 C) |
| Operating temperature | -20 to 40 C |
| Storage temperature | -40 to 70 C |
Specifications from the Applied Motion Products HT11-012 datasheet. Confirm against the current datasheet before design.
Applied Motion HT11-012 datasheet (PDF)
Shaft and encoder versions
HT11-012 is the single shaft motor. HT11-012D adds a rear shaft for a brake, handwheel or encoder. Need an encoder on it? Ask with the quote and we confirm what Applied Motion offers for this frame.
Setting up the drive
Set the drive to 1 A per phase. Torque speed curves at each supply voltage are on the datasheet.
Drives
Applied Motion step drives (STAC5, STAC6, STR and ST series) and StepSERVO closed loop drives run these motors. Tell us the supply voltage, the controller or network and the move profile and we pick the drive with the motor. More on the line at Applied Motion Products stepper and servo motion and the Applied Motion collection.
Cross reference
Replacing an Oriental Motor, Lin Engineering, Moons, Nanotec, Kollmorgen or Anaheim Automation step motor? Send the part number, frame size, holding torque and rated current and we cross it to the Applied Motion HT motor.
Request a QuoteBook 15 Minutes
Oriental Motor, Lin Engineering, Moons, Nanotec, Kollmorgen and Anaheim Automation are trademarks of their respective owners. Applied Control Inc. is not affiliated with these companies. Competitor names appear only to identify products for comparison.