Basor 207389 BF2R 2x2 Basorfil Wire Mesh Cable Tray, 2 in Wide x 2 in Deep, 10 ft, Electrozinc
Priced within one business day. Factory-direct pricing from an authorized rep. Replacing a competitor part? Send the number and we cross it.
Questions or Require Additional Information?
Call us Today at +1-248-830-4850
Basor 207389 is a 2 in wide by 2 in deep Basorfil BF2R wire mesh cable tray, 10 ft long, electrozinc finish. The splices ship on the tray. Push two sections together and the run is joined, no bolts, no tools. Safe working load is 8 lb/ft with supports every 5 ft. Applied Control represents Basor in Michigan and Indiana. Send the reference number and the footage and the quote comes back the same business day.
Request a QuoteBook 15 Minutes
207389 specifications
| Basor reference (EZ) | 207389 |
| Model | BF2R 2"x2" |
| Series | Basorfil BF2R self-splice wire mesh tray |
| Width | 2 in (60 mm) |
| Depth | 2 in (65 mm) |
| Length | 10 ft (3 m) straight section |
| Finish | Electrozinc plated steel (EZ) |
| Safe working load, 5 ft support spacing | 8 lb/ft |
| Splices | Pre-installed self-splice on each section, no center splice needed |
| Useful cross section | 3.91 sq in |
| Weight per section | 4.93 lb |
| Painted versions | 207389B black, 207389W white |
| Material | Steel C9D to EN ISO 16120, electroplated to ISO 2081 |
| Corrosion class, EN IEC 61537 | Class 3 (EZ) |
| Temperature range | -50 C to +150 C |
| Impact strength | 20 J |
| Electrical continuity | Yes, conductive metallic system |
| RoHS | 2011/65/EU |
Specifications from the Basor US-05 product catalog and the BF2R data sheets. Load figures are Basor catalog values at 5 ft support spacing. Confirm against the current data sheet before installation.
Basor US-05 product catalog (PDF) · BF2R data sheet, NEMA VE1 (PDF) · BF2R data sheet, EN IEC 61537 (PDF)
Picking the size
Size the tray by cable area, not by weight. Add up the cross section of every cable in the run, then pick a tray whose useful area holds that total at 50 percent fill or less (NEC 392.22). Keep the support spacing at 5 ft or shorter to hold the load figure above. Basorfil wire is waved, not straight, which is how Basor gets these load numbers from a light section. Cut and bend the mesh on site for tees, drops and direction changes. Use offset bolt cutters and cut close to a wire crossing. Covers, dividers, drop-out plates, trapeze hangers, wall brackets and center hangers are in the catalog. Send the run layout and we quote the hardware with the tray.
Other finishes
The same sizes come hot dip galvanized, 304 stainless and 316 stainless in the bolt-splice BFR series, and EZ1000 high corrosion coating and black or white powder coat in this series. Send the size and the environment and we pick the finish.
Grounding
Basor states in the US catalog that Basorfil wire mesh tray can serve as an equipment grounding conductor when installed to NEC Article 392 and the assembly instructions. Ask for the grounding clamp reference with the quote.
Cross reference
Have a Legrand Cablofil, Eaton B-Line Flextray, Chatsworth OnTrac or Panduit Wyr-Grid part number? Send it with the width, depth and finish and we cross it to the matching Basor reference. More on the line at Basor cable tray and cable management and the Basor collection.
Request a QuoteBook 15 Minutes
Legrand, Cablofil, Eaton, B-Line, Flextray, Chatsworth, OnTrac, Panduit and Wyr-Grid are trademarks of their respective owners. Applied Control Inc. is not affiliated with these companies. Competitor names appear only to identify products for comparison.