LR3 48-5/1600 Block Line Reactor, 1600 A, 5% Impedance, 480 V, 1400 HP

SKU: LR3 48-5/1600
Request a Quote Book 15 Minutes with an Application Engineer

Priced within one business day. Factory-direct pricing from an authorized rep. Replacing a competitor part? Send the number and we cross it.

Questions or Require Additional Information?

Call us Today at +1-248-830-4850

The Block LR3 48-5/1600 is a 3 phase line reactor rated 1600 A at 480 V with 5% impedance (0.023 mH per phase). Block USA rates it for 1400 HP at 480 V. It is UL 508 Listed and cULus marked, open frame (IP00), with copper windings and class H insulation. Applied Control is the Block manufacturers' representative. Send the catalog number, or the drive HP, voltage and impedance you need, and we send back a quote.

Request a QuoteBook 30 Minutes to Review the Application

LR3 48-5/1600 specifications

Catalog number LR3 48-5/1600
Manufacturer Block Transformatoren-Elektronik (Block USA)
Series LR3 line reactor, 3 phase
Rated current 3 x 1600 A AC
Linear current 3 x 2400 A AC
Inductance 3 x 0.023 mH
Impedance (short circuit voltage) 5% at 480 V
Rated voltage 480 V (voltage range 0 to 690 V)
Frequency 50 to 60 Hz
HP at 480 V (Block USA line reactor brochure) 1400 HP
Motor or converter power (Block product page) 1000 kW (1341.02 HP)
Insulation class H (180 C), UL class 180
Duty cycle 100%
Protection IP00, open core and coil, mount inside an enclosure
Ambient temperature -10 to 40 C (14 to 104 F)
Max. installation height 1,000 m (3,281 ft)
Terminals Flat copper bus connections for line and load, bolt connection for ground
Winding material Copper
Dimensions (W x H x D) 540 x 465 x 370 mm (21.26 x 18.31 x 14.57 in)
Weight 344.52 kg (759.54 lb)
Standards and listings UL 508 Listed, cULus, EN 61558-2-20, RoHS (EN IEC 63000)

Specifications from the Block product page for LR3 48-5/1600. HP rating from the Block USA line reactor brochure where listed. Confirm against the current datasheet before installation.

Crossing to LR3 48-5/1600

The Block USA cross reference table stops at 500 HP (630 A), so it lists no Rockwell 1321, MTE, TCI, Acme or Hammond Power Solutions part at 1600 A. For a larger drive, send the competitor part number or the drive nameplate and we check the Block rating with you. The table up to 500 HP is on the line reactor cross reference page.

Nearby sizes

Next 5% size: LR3 48-5/1400. Same current at 3% impedance: LR3 48-3/1600.

3% or 5%?

A 3% reactor on the drive input cuts line notching and nuisance overvoltage trips and is the usual default. A 5% reactor cuts input current harmonics further and gives more protection when the supply is stiff or has capacitor switching upstream. On the output side, a reactor slows voltage rise at the motor on longer lead runs. Send the drive model and motor lead length and we will size it with you. See line reactor vs load reactor, the Block collection, TECO AC drives and the cross reference hub.

Request a QuoteBook 30 Minutes to Review the Application

Rockwell Automation, MTE, TCI, Acme and Hammond Power Solutions are trademarks of their respective owners. Applied Control Inc. is not affiliated with these companies. Competitor names appear only to identify products for comparison.