1000.3/4NPT.205 AGRO Progress 3/4 in NPT Cable Gland, 16 to 20.5 mm Cable, Nickel-Plated Brass
Priced within one business day. Factory-direct pricing from an authorized rep. Replacing a competitor part? Send the number and we cross it.
Questions or Require Additional Information?
Call us Today at +1-248-830-4850
The AGRO 1000.3/4NPT.205 is a 3/4 in NPT cable gland in nickel-plated brass from the AGRO Progress series. It clamps cable from 16 to 20.5 mm outside diameter, which is 0.63 to 0.81 in. The thread is 15 mm long and the wrench size is 30 mm. It is rated IP 68 (10 bar) and IP 69 from -40 C to +100 C. Applied Control represents the Aeros USA line, the AGRO cable gland source for Michigan and Indiana. Send the article number and the cable diameter and the quote comes back the same business day.
Request a QuoteBook 15 Minutes
1000.3/4NPT.205 specifications
| Article number | 1000.3/4NPT.205 |
| Series | AGRO Progress, nickel-plated brass |
| Entry thread | 3/4 in NPT |
| Thread length | 15 mm |
| Clamping range | 16 to 20.5 mm (0.63 to 0.81 in) |
| UL clamping range | 17 to 20.5 mm |
| Wrench size | 30 mm |
| Height H | 28 mm |
| Material | Nickel-plated brass |
| Seal | TPE |
| Protection class | IP 68 (10 bar), IP 69 |
| Operating temperature | -40 C to +100 C |
| UL file, per AGRO | QCRV2.E137641 (USA), QCRV8.E137641 (Canada) |
Specifications from the AGRO Progress size table and AGRO product pages. Inch figures are converted from mm. Confirm against the current AGRO datasheet before installation.
AGRO Progress nickel-plated brass size table (agro.ch)
Picking the size
Start from the cable outside diameter, not the thread. Each NPT size comes in two or three clamping ranges, and the last digits of the article number give the top of the range in tenths of a mm. So 1000.3/4NPT.205 tops out at 20.5 mm. Pick the range that puts your cable near the middle, then match the NPT size to the hole or hub in the box. Seal the NPT thread if the IP 68 figure has to hold at the entry. Metric M16 to M63 Progress glands are on this site too.
Cross reference
Have a Thomas and Betts, Hubbell, Lapp SKINTOP, Hummel or Pflitsch NPT cable gland part number? Send it with the cable outside diameter and the hub size, and we cross it to the matching AGRO article number. See the Lapp SKINTOP MS-M to AGRO and Hummel HSK-M to AGRO cross references, the Aeros USA cable protection page and the AGRO cable gland collection.
Request a QuoteBook 15 Minutes
Thomas and Betts, Hubbell, Lapp, SKINTOP, Hummel and Pflitsch are trademarks of their respective owners. Applied Control Inc. is not affiliated with these companies. Competitor names appear only to identify products for comparison.