Pflitsch blueglobe to AGRO Cable Gland Cross Reference

Pflitsch blueglobe bg 220ms (M20) crosses to AGRO Progress MS 1000.20. The table crosses the blueglobe nickel-plated brass metric glands, M16 to M63, to the AGRO Progress MS gland with the same thread, and shows where the cable ranges overlap. Both are IP 68 and IP 69 rated.

Request a QuoteBook 30 Minutes to Review the ApplicationCall 248-830-4850

blueglobe brass to AGRO Progress MS

Pflitsch Thread Pflitsch cable range AGRO Progress MS AGRO cable range Wrench, Pflitsch / AGRO Fit
bg 216ms M16x1.5 4 to 11 mm 1000.17 (short, 5 mm) or 1100.17 (long, 10 mm) 6 to 10.5 mm 20 / 18 mm Cable 6 to 10.5 mm fits both. AGRO starts at 6 mm; Pflitsch goes down to 4 mm. AGRO tops out at 10.5 mm; Pflitsch goes to 11 mm.
bg 220ms M20x1.5 5 to 14 mm 1000.20 (short, 6 mm) or 1100.20 (long, 10 mm) 8 to 15 mm 24 / 24 mm Cable 8 to 14 mm fits both. AGRO starts at 8 mm; Pflitsch goes down to 5 mm. AGRO reaches 15 mm.
bg 225ms M25x1.5 11 to 20 mm 1000.25 (short, 7 mm) or 1100.25 (long, 11 mm) 12.5 to 20.5 mm 30 / 30 mm Cable 12.5 to 20 mm fits both. AGRO starts at 12.5 mm; Pflitsch goes down to 11 mm. AGRO reaches 20.5 mm.
bg 232ms M32x1.5 15 to 25 mm 1000.32 (short, 8 mm) or 1100.32 (long, 13 mm) 17 to 25.5 mm 36 / 36 mm Cable 17 to 25 mm fits both. AGRO starts at 17 mm; Pflitsch goes down to 15 mm. AGRO reaches 25.5 mm.
bg 240ms M40x1.5 20 to 32 mm 1000.40 (short, 8 mm) or 1100.40 (long, 13 mm) 24 to 33 mm 45 / 46 mm Cable 24 to 32 mm fits both. AGRO starts at 24 mm; Pflitsch goes down to 20 mm. AGRO reaches 33 mm.
bg 250ms M50x1.5 31 to 42 mm 1000.50 (short, 9 mm) or 1100.50 (long, 14 mm) 33 to 42 mm 57 / 55 mm Cable 33 to 42 mm fits both. AGRO starts at 33 mm; Pflitsch goes down to 31 mm.
bg 263ms M63x1.5 41 to 54 mm 1000.63 (short, 10 mm) or 1100.63 (long, 14 mm) 40 to 52 mm 68 / 70 mm Cable 41 to 52 mm fits both. AGRO starts at 40 mm; Pflitsch goes to 54 mm.

What is different

  • Cable range. Each gland uses a two-piece insert, but the ranges do not line up exactly. blueglobe reaches smaller cable on M16 to M50, and AGRO reaches larger cable on M20 to M40 and smaller cable on M63. Measure the cable OD and check the Fit column. For cable outside the AGRO range, send the OD and we pick the AGRO insert or reducing part.
  • Seal pressure. Pflitsch lists IP 68 up to 15 bar. AGRO lists IP 68 at 10 bar. Both list IP 69.
  • Thread length. blueglobe threads run 6 to 10 mm. AGRO offers a short thread (1000 series, 5 to 10 mm) and a long thread (1100 series, 10 to 14 mm). Pick the long thread for thick walls or a locknut plus a gasket.
  • Wrench size. Within 2 mm on every size, so check spacing only on tight multi-gland plates (M40 and up).

Common questions

What AGRO gland replaces a Pflitsch bg 220ms?

The AGRO Progress MS 1000.20 (short thread) or 1100.20 (long thread). Both are M20x1.5 nickel-plated brass. AGRO clamps 8 to 15 mm cable; the bg 220ms covers 5 to 14 mm. For cable under 8 mm, send the OD.

Are AGRO glands UL listed?

The AGRO product pages list a UL clamping range for each size, which is narrower than the full clamping range. If the panel is UL 508A, size the gland to the UL range on the product page.

Do you cross Pflitsch NPT or stainless glands?

Yes. Send the Pflitsch article number and the cable OD. AGRO Progress also comes in 1/2 to 1-1/4 in NPT on this site.

What about Lapp and Hummel?

See the Lapp SKINTOP MS-M and Hummel HSK-M cross pages.

Cross your gland list

Send the Pflitsch part numbers, quantities and cable ODs. We send back the AGRO article numbers, lead time and a quote.

Request a QuoteBook 30 Minutes to Review the ApplicationCall 248-830-4850

Related: Aeros USA and AGRO glands · Washdown enclosures and cooling · All cross references