Belden 29505 crosses to Tekima CV04GB16_0365S. Both are 6 AWG shielded VFD motor supply cables, three conductors plus a ground, rated 600/1000V and UL Listed Type TC-ER for exposed run in cable tray.
Email a Part Number for a QuoteCall 248-425-9065
Belden 29505 to Tekima cross reference
| Part number | Size | Construction | UL listing | Voltage |
|---|---|---|---|---|
| Belden 29505 | 6 AWG | 3C + ground, shielded | UL Listed TC-ER | 600/1000V |
| Tekima CV04GB16_0365S | 6 AWG | 3C + ground, shielded | UL Listed TC-ER (E361258) | 600/1000V |
Add the jacket color code to order: CV04GB16_0365S_GR for gray, CV04GB16_0365S_NE for black.
What Belden 29505 is used for
Belden 29505 is a 6 AWG flexible motor supply cable built for the run between a variable frequency drive and its motor. The shield suppresses the high frequency noise a PWM drive puts on the cable, and the low capacitance construction limits the common mode current that damages motor bearings and shortens insulation life.
Where the Tekima 365S differs
- Shield: 100 percent foil coverage with an overall tinned copper braid.
- Approvals: UL Listed TC-ER, c(UL) CIC/TC-ER, WTTC, MTW 600V, direct burial, sunlight resistant, oil resistant I and II, FT4/IEEE 1202.
- Cut to length: Tekima runs a UL certified cut-to-length service. Reels are cut to your list before they ship, so the panel shop is not absorbing offcut scrap.
- Temperature: 90°C dry and 90°C wet, minimum -40°C.
Check the UL listing before you substitute
Tekima builds two low-capacitance VFD families and they are not interchangeable.
- 365S is UL Listed Type TC-ER (file E361258), XHHW-2, 600/1000V, direct burial, sunlight resistant, oil resistant I and II, FT4/IEEE 1202, WTTC, c(UL) CIC/TC-ER, and MTW 600V. This is the series that substitutes for competitor tray cable.
- 361S is c(UR)us Recognized under AWM Style 2570 (file E314444) and carries an 80°C rating at 1000V on the UL side. It is not tray cable. Use it inside enclosures and machinery per NFPA 79 and UL 508A, not in an exposed tray run.
Every cross on this page is to 365S. If a quote comes back referencing 361S for a tray application, it is the wrong part.
Common questions
What is the equivalent of Belden 29505?
The Tekima equivalent of Belden 29505 is CV04GB16_0365S, a 6 AWG low-capacitance VFD motor supply cable from the Tekima 365S series. Both are shielded, three conductor plus ground designs rated 600/1000V and UL Listed Type TC-ER.
Is Belden 29505 the same as Tekima CV04GB16_0365S?
They are functionally equivalent for VFD to motor runs at 6 AWG. Both carry UL Listed Type TC-ER, both are rated 600/1000V, and both use a foil plus tinned copper braid shield. Tekima 365S uses 100 percent foil coverage with an overall braid and is offered with a UL certified cut-to-length service. Confirm jacket material and temperature rating against the application before substituting.
What does the suffix on Tekima part number CV04GB16_0365S mean?
Tekima part numbers end in a two character jacket color code. GR is gray and NE is black. The complete orderable part number for a black jacket is CV04GB16_0365S_NE.
Does Tekima VFD cable meet NFPA 79?
Yes. Tekima 365S is listed for use under ANSI/NFPA 79 for industrial machinery and under NFPA 70 (NEC) Article 336 for Type TC-ER exposed run applications.
Get a cross-referenced quote
Send the part number and the footage. We come back with the Tekima equivalent, the construction difference if there is one, and a price inside 48 hours.
Email a Part Number for a QuoteCall 248-425-9065
Tekima also runs a UL certified cut-to-length service. If you are buying full reels and scrapping the offcuts, tell us the cut list and we will quote it cut to size.
Email: christian.lauderback@appliedcontrolinc.com
Phone: 248-425-9065
Belden® is a registered trademark of Belden Inc. ÖLFLEX® and SKINTOP® are registered trademarks of Lapp Holding SE. Southwire® is a registered trademark of Southwire Company, LLC. HELUKABEL®, TOPFLEX® and TOPSERV® are registered trademarks of HELUKABEL GmbH. SABIX® is a registered trademark of SAB Bröckskes GmbH & Co. KG. Applied Control Inc. is not affiliated with, endorsed by, or sponsored by any of these companies. Competitor part numbers appear here solely to identify products for comparison. All specifications are taken from publicly available manufacturer documentation and are subject to change. Verify current specifications against the manufacturer’s own datasheet before purchase or installation.