Cablofil CF54, CF105 and CF150 wire mesh tray cross to Basor Basorfil BF2R 2 in, 4 in and 6 in deep tray in the same widths. Both are welded steel wire mesh tray in 10 ft (3 m) straight sections, electrozinc finish, corrosion class 3 under IEC 61537. Basor BF2R ships with the splices on the tray. Applied Control represents Basor in Michigan and Indiana. Send the Cablofil catalog number and the footage and the Basor quote comes back the same business day.
Request a QuoteBook 15 Minutes
Cablofil to Basor cross reference, electrozinc straight sections
| Cablofil catalog number | Cablofil size | Basor reference | Basor size |
|---|---|---|---|
| CF54/50EZ | 2 in x 2 in (54 mm deep) | Basor 207389 (BF2R 2x2) | 2 in x 2 in (65 mm deep), Basor is 60 mm wide |
| CF54/100EZ | 4 in x 2 in (54 mm deep) | Basor 207248 (BF2R 4x2) | 4 in x 2 in (65 mm deep) |
| CF54/150EZ | 6 in x 2 in (54 mm deep) | Basor 207249 (BF2R 6x2) | 6 in x 2 in (65 mm deep) |
| CF54/200EZ | 8 in x 2 in (54 mm deep) | Basor 207250 (BF2R 8x2) | 8 in x 2 in (65 mm deep) |
| CF54/300EZ | 12 in x 2 in (54 mm deep) | Basor 207251 (BF2R 12x2) | 12 in x 2 in (65 mm deep) |
| CF54/400EZ | 16 in x 2 in (54 mm deep) | Basor 207394 (BF2R 16x2) | 16 in x 2 in (65 mm deep) |
| CF54/450EZ | 18 in x 2 in (54 mm deep) | Basor 209989 (BF2R 18x2) | 18 in x 2 in (65 mm deep) |
| CF54/500EZ | 20 in x 2 in (54 mm deep) | Basor 207395 (BF2R 20x2) | 20 in x 2 in (65 mm deep) |
| CF54/600EZ | 24 in x 2 in (54 mm deep) | Basor 207396 (BF2R 24x2) | 24 in x 2 in (65 mm deep) |
| CF105/100EZ | 4 in x 4 in (105 mm deep) | Basor 207914 (BF2R 4x4) | 4 in x 4 in (105 mm deep) |
| CF105/150EZ | 6 in x 4 in (105 mm deep) | Basor 207915 (BF2R 6x4) | 6 in x 4 in (105 mm deep) |
| CF105/200EZ | 8 in x 4 in (105 mm deep) | Basor 207397 (BF2R 8x4) | 8 in x 4 in (105 mm deep) |
| CF105/300EZ | 12 in x 4 in (105 mm deep) | Basor 207398 (BF2R 12x4) | 12 in x 4 in (105 mm deep) |
| CF105/400EZ | 16 in x 4 in (105 mm deep) | Basor 207399 (BF2R 16x4) | 16 in x 4 in (105 mm deep) |
| CF105/450EZ | 18 in x 4 in (105 mm deep) | Basor 209990 (BF2R 18x4) | 18 in x 4 in (105 mm deep) |
| CF105/500EZ | 20 in x 4 in (105 mm deep) | Basor 207400 (BF2R 20x4) | 20 in x 4 in (105 mm deep) |
| CF105/600EZ | 24 in x 4 in (105 mm deep) | Basor 207401 (BF2R 24x4) | 24 in x 4 in (105 mm deep) |
| CF150/200EZ | 8 in x 6 in (150 mm deep) | Basor 225201 (BF2R-P 8x6) | 8 in x 6 in (150 mm deep) |
| CF150/300EZ | 12 in x 6 in (150 mm deep) | Basor 225202 (BF2R-P 12x6) | 12 in x 6 in (150 mm deep) |
| CF150/400EZ | 16 in x 6 in (150 mm deep) | Basor 225203 (BF2R-P 16x6), quote | 16 in x 6 in (150 mm deep) |
| CF150/450EZ | 18 in x 6 in (150 mm deep) | Basor 225204 (BF2R-P 18x6), quote | 18 in x 6 in (150 mm deep) |
| CF150/500EZ | 20 in x 6 in (150 mm deep) | Basor 225205 (BF2R-P 20x6), quote | 20 in x 6 in (150 mm deep) |
| CF150/600EZ | 24 in x 6 in (150 mm deep) | Basor 225206 (BF2R-P 24x6), quote | 24 in x 6 in (150 mm deep) |
Cablofil black painted (EZ+ or BK suffix) crosses to the Basor reference with a B suffix, white to the W suffix. Cablofil GC hot dip galvanized, 304L and 316L cross to the Basor BFR bolt-splice series in the same size; send the catalog number. Cablofil CF30 (1 in deep) and Basor BFR 1.5 in deep are not a direct cross, ask.
Where the two differ
- Depth of the 2 in family: Cablofil CF54 is 54 mm deep. Basor BF2R H2 is 65 mm deep, so the useful area is larger for the same width. The 4 in and 6 in families match at 105 mm and 150 mm.
- Splicing: Cablofil sections join with splice hardware sold as separate catalog numbers. Basor BF2R ships with the splices installed and joins by hand, no tools. Basor BFR is the bolt-splice series if the spec calls for separate hardware.
- Narrow tray: Cablofil CF54/50 is 50 mm wide. The Basor BF2R 2x2 is 60 mm wide. Check the support and cover if the run is tight.
- Wide tray: Basor lists BF2R 28x4 (700 mm) and BF2 30 to 36 in wide sections. Cablofil CF105 stops at 600 mm in its standard catalog.
- Load data: Basor publishes safe working load in lb/ft at 5 ft support spacing on each product page here. Cablofil publishes loads by span on its technical sheets. Compare at the same span before substituting.
Accessories
Covers, dividers, drop-out plates, trapeze and wall supports, center hangers and grounding clamps all have Basor references. Send the Cablofil accessory list with the tray list and we quote the whole run.
Common questions
What is the Basor equivalent of Cablofil CF54 wire mesh tray?
Cablofil CF54 is the 2 in deep family. The Basor equivalent is Basorfil BF2R 2 in deep, 65 mm, in the same widths from 4 in to 24 in. CF54/50 (50 mm wide) crosses to BF2R 2x2 at 60 mm wide.
What is the Basor equivalent of Cablofil CF105?
Cablofil CF105 is the 4 in deep family. The Basor equivalent is Basorfil BF2R 4 in deep, 105 mm, in widths from 4 in to 24 in, plus a 28 in size Cablofil does not list in CF105.
Do Cablofil and Basor splices interchange?
No. Cablofil straight sections are joined with Cablofil splice hardware ordered as separate catalog numbers. Basor BF2R ships with its splices on the tray and needs no hardware to join two sections. Do not mix the two systems in one run without a lateral splice kit; send the layout and we quote it.
Are the finishes the same?
Both makers rate electrozinc (EZ) at corrosion class 3 under IEC 61537. Cablofil offers GC hot dip galvanized, HR zinc-aluminum, 304L and 316L. Basor offers hot dip galvanized, 304 and 316 stainless in the bolt-splice BFR series, EZ1000 (class 8+) and black or white powder coat in BF2R.
Get a cross-referenced quote
Send the Cablofil catalog numbers and the footage. We come back with the Basor reference, the construction difference if there is one, and a price.
Request a QuoteBook 15 Minutes
More cross references
Cable tray and cable protection: Basor cable tray overview · Basor product pages · Lapp SKINTOP MS-M to AGRO glands · Hummel HSK-M to AGRO glands · VFD cable, all brands
Other families: Hoffman to Hammond · Baldor, WEG, ABB and Siemens motors · Enclosure air conditioners, all brands · Control transformers by kVA · All cross references
Cablofil® is a registered trademark of Legrand. Applied Control Inc. is not affiliated with, endorsed by, or sponsored by Legrand. Competitor part numbers appear here solely to identify products for comparison. All specifications are taken from publicly available manufacturer documentation and are subject to change. Verify current specifications against the manufacturer's own data sheet before purchase or installation.